Twonky - My Book World Edition - PS3

Discuss Twonky and PS3 here
eskordok
Posts: 4
Joined: Tue Apr 12, 2011 2:38 am
AV Hardware: My Book World Edition
PS3
Windows 7

Twonky - My Book World Edition - PS3

Postby eskordok » Tue Apr 12, 2011 5:04 am

Scenario:
PC Windows 7 running Twonky Server 6.0.32
Drives on that Machine:
Drive C is the OS
Drive E is a USB External Hard Drive
Drive F Mapped to a My Book World Edition II External Hard Drive (No Twonky Installed)
Drive G Mapped to a My Book World Edition External Hard Drive (With Twonky Media Server 5.1.9 Pre-Installed)
All drives are full of Videos.

Problem:
When I go to Twonky 6 on my Windows Machine and to Basic Setup -> Sharing I have the following shares:
E:\Films
F:\Films2
G:\Films3

Once on my PS3 I can see everything on my E and F drives but can't see anything on my G drive (The one with Twonky 5 pre-installed)

I know I can update My Book World Edition to Twonky using ssh and some hacking since WD hasn't release yet a version 6 of Twonky on their firmware, but is there a way to use my current version 6 of Twonky from my PC to read that external Hard Drive?

I just bough Twonky 6 and I just need it to read that Hard Drive.

What about aggregation on the Advance Setup? How can I configure maybe Twonky 6 to read shares of Twonky 5?

Do I need to uninstall or stop Twonky 5 in order for Twonky 6 to read that Hard Drive.

note: I notice that when I click Browse on Sharing I get a list of letters like:
A:\
C:\
E:\
F:\

What is strange is that I don't get drive G even if is also a mapped drive like the rest.

Any Ideas or suggestions will be appreciate.

Thanks

eskordok
Posts: 4
Joined: Tue Apr 12, 2011 2:38 am
AV Hardware: My Book World Edition
PS3
Windows 7

Re: Twonky - My Book World Edition - PS3

Postby eskordok » Tue Apr 12, 2011 7:19 pm

I now have both my Windows 7 Server with Twonky Server 6 and the My Book World Edition with Twonky 6 also installed and running perfectly.

For anyone else out there this is what I did in a step by step:

1 – Make sure you have the latest firmware on your MBWE (My Book World Edition). At the time of this procedure I had version 01.02.06 that include Twonky 5. Check it at:
http://whatever your IP address of the MBWE then go to System -> Update

2 - You need to enable ssh on your MBWE. Go to System -> Advanced and check enable ssh and submit

3 – Download and Install putty. I got it from here: http://the.earth.li/~sgtatham/putty/0.60/x86/putty.exe

4 – Open Putty and connect to MBWE using the IP address for it.

5 - Once connected use root as the username and welc0me as the password

6 – Install Optware, follow this procedure: (Found at http://mybookworld.wikidot.com/optware for more detail instruccion or this is what I did)

A – Run the following commands:
# wget http://mybookworld.wikidot.com/local--f ... telight.sh
# sh setup-whitelight.sh
# echo "export PATH=$PATH:/opt/bin:/opt/sbin" >> /root/.bashrc
# echo "export PATH=$PATH:/opt/bin:/opt/sbin" >> /etc/profile

B – You must logout and log back in. Use # exit to log out and log back in as before

C – keep running this commands:
# /opt/bin/ipkg update
I installed also the nano editor to be used after:
# /opt/bin/ipkg install nano
I installed also unzip to be use after also:
# /opt/bin/ipkg install unzip

7 – Go to:
cd /usr/local
mkdir twonky6
cd twonky6

8 - Get the new version of Twonky 6 for NAS:
wget downloads/6.0.32/twonkymedia-mss2-6.0.32.zip

9 – Unzip the new downloaded file:
Unzip twonkymedia-mss2-6.0.32.zip

10 – Shutdown the old Twonky Server:
killall twonkymedia

11 – Start the new Twonky version 6 as a daemon:
./twonkymedia –D

12 – Change the file S97twonkyserver with the new directory so it doesn’t go back to Twonky 5 when you reboot MBWE or the power goes off
I’m using nano as an editor here:
cd /etc/init.d
nano S97twonkyserver

Go to line 28 and change to your new Directory = WORKDIR="twonky6"

You can use this commands on Nano:
^A move to beginning of line
^E move to end of line
^C find out what line the cursor is currently on
^O save contents without exiting
X exit nano

13 - Go to your browser and change your video, music and pictures shares

I hope this help someone else :)

RPeter
Posts: 1
Joined: Mon Nov 14, 2011 5:57 pm
AV Hardware: -

Re: Twonky - My Book World Edition - PS3

Postby RPeter » Mon Nov 14, 2011 6:03 pm

I thank you for the manual,.... but...
It asks for a serial number. Although the site says an update from 5.x is free...???

Twonky_Rick
Posts: 3816
Joined: Wed Nov 19, 2008 1:59 am
AV Hardware: Samsung 650 Series TV (2010), 4.5TB HP MediaSmart server with 100,000 songs, 5) AT&T U-Verse STB, CE form-factor Media Center PC and 6 other networked PCs running TwonkyManager, 2 Sonos ZP80, Sonos S5 speaker, Apple TV (running XBMC), Roku Soundbridge, X-Box 360, Sony PS3, Kodak 10" Wireless Photo Frame, iPhone with PlugPlayer software, Sonos CR-100.
Location: San Diego
Contact:

Re: Twonky - My Book World Edition - PS3

Postby Twonky_Rick » Mon Nov 14, 2011 7:11 pm

I think it's only free if you bought your 5.0 software from the Twonky.com website.

- Rick
Follow me on Twitter! mostlytech1
Checkout my blog: http://mostly-tech.com/


Return to “PS3”

Who is online

Users browsing this forum: No registered users and 2 guests

cron