I am running an unslung nslu2 with the latest linksys, linux, and twonky media sw (V2.3R63-uNSLUng-6.10-beta, tm 4.4.5) connected to an Actiontec mi424wr router (also running the latest version).
I have my nslu2 unslung to a 1 gig flash card on disk 1 and a 500 gig hd on disk 2.
I can access the TwonkMedia Config & 500 gig drive with no issues and can play my movies, pisc, or music to my hearts content through my HP Media Smart TV or my sons X-Box 360 via 500 gig hd.
My issue is anytime i try and copy files to the 500 gig drive, as soon as i get about 10-20% complete (for example when I copy 1 gig VOB files) the Twonky Media server disconnects (in other words disappears from my system and becomes unavailable or unaccessible).
I get a server not found message and cannot access via the normal "http://192.168.1.77:9000/config" link.
Pressing the power button on the nslu2 will not shut the unit down and i am forced to restart via disconnecting the power lead.
BTW, initially during file transfer i see the ethernet LED and Disc 2 LED (ext 500 gig drive location) flashing as to indicate that the file transfer process is occurring, then the flashing stops, except for an occasional ethernet LED flashing. All the LEDs do remain lit though, even after the server becomes unavailable.
One other fact; i logged into my Actiontec router and do get a successfull PING result for the NSLU2, even though i cannot access the server by going to the ip address.
Hopefully someone has experienced this issue and can may point me in the right direction!